HP ProLiant Series ML100 - Manual (Page 87)

Class B equipment
Chinese notice
Class A equipment
Lase c
is prod
Product in
co IEC 60825-1. The product does not emit hazardous laser
Each laser product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
r ompliance
Th uct may be provided with an optical storage device (that is, CD or DVD drive) and/or fiber optic
transceiver. Each of these devices contains a laser that is classified as a Class 1 Laser
ac rdance with US FDA regulations and the
radiation.
Notice No. 50, dated May 27, 2001; and with IEC 60825-1:1993/A2:2001.
WARNING: Use of controls or adjustments or performance of procedures ot
spe
exp
her than those
cified herein or in the laser product's installation guide may result in hazardous radiation
osure. To reduce the risk of exposure to hazardous radiation:
.
make adjustments, or perform procedures to the laser device other
• Do not try to open the module enclosure. There are no user-serviceable components inside
• Do not operate controls,
than those specified herein.
• Allow only HP Authorized Service technicians to repair the unit.
e C
imple se regulations apply to laser products
s mandatory for products marketed in the United States.
Batte
Th enter for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
mented regulations for laser products on August 2, 1976. The
manufactured from August 1, 1976. Compliance i
ry replacement notice
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack is no
WARNING: The computer contains an internal lithium manganese dioxide, a vanadium
t
properly handled. To reduce the risk of personal injury:
• Do not attempt to recharge the battery.
• Do not expose the battery to temperatures higher than 60°C (140°F).
• Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
Regulatory compliance notices 87