HP ProLiant Series ML100 - Manual (Page 76)

Errors o
Action: Change settings to the original configuration. If more than one setting was changed, change the
of the problem.
Errors o n is installed
for entries indicating why the software failed.
• Check system settings to determine if they are the cause of the error. You may need to obtain the
tware switches. Refer to the application
ed
have the most current drivers.
Firmwa
maintenance. Many of these technologies also reduce server management efforts, enabling administrators
A firm rsion of firmware from the ROM and replaces it with a
rdware, such as a processor revision
ous firmware version
the server and hardware options may not function properly.
Types
76 )
ROM upgrade to take effect. For disaster recovery or ROM downgrade
p e are available in either redundant ROM or a ROM
k
ccur after the system software is changed
settings one at a time to isolate the cause
ccur after an applicatio
Action:
• Check the application log and operating system log
settings from the server setup utility and manually set the sof
documentation, the vendor website, or both.
• Check for overwritten files. Refer to the application documentation to find out which files are add
by the application.
• Reinstall the application.
• Be sure you
re maintenance
HP has developed technologies to help ensure that HP servers provide maximum uptime with minimal
to work on issues and resolve problems without taking servers offline.
The process of updating system or option firmware is referred to as a flash process or flashing the ROM.
ware or ROM flash removes the existing ve
more recent version.
Update the firmware to do the following:
• Support new ha
• Support new features
• Correct problems in a previ
Without the correct firmware version,
of ROM
Types of ROMs include:
• System ROM (on page
• Option ROMs (on page 77 )
System ROM
All ProLiant servers have a system ROM.
A system reboot is required for a
pur oses, backups of the most current ROM imag
bac up.
Troubleshooting 76