HP ProLiant Series ML100 - Manual (Page 41)

This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING: To reduce the risk of electric shock, fire, or damage to the equipme
not plug telephone
nt,
do or telecommunications connectors into this receptacle.
T i ndicates the presence of a hot surface or hot component. If this surface is
ntac
h s symbol i
co ted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow the surface to
cool before touching.
.22 kg
individual to handle safely.
20.41-27
8-
This symbol indicates that the component exceeds the recommended weight for one
l injury or damage to the equipment, WARNING: To reduce the risk of persona
47.1 60 lb
observe local occupational health and safety requirements and guidelines for manual
material handling.
by multip
WARNIN
These symbols, on power supplies or systems, indicate that the equipment is supplied
le sources of power.
G: To reduce the risk of injury from electric shock, remove all power cords
to completely disconnect power from the system.
Warnings and cautions
WARNING: Only authorized technicians trained by HP should attempt to repair this
equipment. All troubleshooting and repair procedures are detailed to allow only
omplexity of the individual boards and
mponent level or to make
modifications to any printed wiring board. Improper repairs can create a safety hazard.
subassembly/module-level repair. Because of the c
subassemblies, no one should attempt to make repairs at the co
WARNING: To reduce the risk of personal injury or damage to the equipment, be sure that:
• The leveling feet are extended to the floor.
to the rack if it is a single-rack installation.
ple-rack installations.
ime. A rack may become unstable if more than one
• The full weight of the rack rests on the leveling feet.
• The stabilizing feet are attached
• The racks are coupled together in multi
• Only one component is extended at a t
component is extended for any reason.
WARNING: To reduce the risk of electric shock or damage to the equipment:
. The grounding plug is an important safety
l outlet that is easily accessible at all
pply to disconnect power to the equipment.
n be walked on or pinched by items placed against
plug, electrical outlet, and the point where the cord
• Do not disable the power cord grounding plug
feature.
• Plug the power cord into a grounded (earthed) electrica
times.
• Unplug the power cord from the power su
• Do not route the power cord where it ca
it. Pay particular attention to the
extends from the server.
Troubleshooting 41