Array configuration utility, Option rom configuration for arrays, Hp insight diagnostics – HP ProLiant Series ML100 User Manual
Page 32: Management tools, Rompaq utility, Lights-out 100i technology, Arra, Y configuration utility, Opti, Hp in
6.
Press the Enter key.
7.
Press the Esc key to exit the current menu, or press the F10 key to exit RBSU.
n on Lockstep memory, see the white paper on the HP website
w1.hp.com/products/servers/technology/memoryprotection.html
For more informatio
(
http://h18000.ww
).
Arra
application or remote service
RAID or stripe size migration
n unconfigured system
the minimum display settings are 800 × 600 resolution and 256 colors.
® operating systems require Internet Explorer 5.5 (with Service Pack 1) or later.
ser and support information.
Controllers Reference Guide on
y Configuration Utility
ACU is a browser-based utility with the following features:
•
Runs as a local
•
Supports online array capacity expansion, logical drive extension, assignment of online spares, and
•
Suggests the optimum configuration for a
•
Provides different operating modes, enabling faster configuration or greater control over the
configuration options
•
Remains available any time that the server is on
•
Displays on-screen tips for individual steps of a configuration procedure
For optimum performance,
Servers running Microsoft
For Linux servers, refer to the README.TXT file for additional brow
For more information, refer to the Configuring Arrays on HP Smart Array
the Documentation CD or the HP website
Opti
can use the ORCA utility to create the first logical drive, assign
RAID levels, and establish online spare configurations.
rrent logical drive configuration
ontroller
uide.
on the Documentation CD.
HP In
stem to
be sure it is operating properly. The utility has online help and can be accessed using the Easy Set-up CD.
on ROM Configuration for Arrays
Before installing an operating system, you
The utility also provides support for the following functions:
•
Reconfiguring one or more logical drives
•
Viewing the cu
•
Deleting a logical drive configuration
•
Setting the controller to be the boot c
If you do not use the utility, ORCA will default to the standard configuration.
For more information regarding array controller configuration, refer to the controller user g
For more information regarding the default configurations that ORCA uses, refer to the HP ROM-Based
Setup Utility User Guide
sight Diagnostics
The HP Insight Diagnostics utility displays information about the server hardware and tests the sy
Software and configuration utilities 32