HP ProLiant Series ML100 - Manual (Page 71)

or
Reconfigure the auto-answer option to respond in fewer rings than the answering machine.
Modem does not connect to another modem
Actio
r extension before using it.
3. Be sure you are dialing the correct telephone number.
Modem is
Actio
l times. If
3. ing. Disable call waiting,
AT com
Connec n
1. Check the maximum baud rate for the modem to which you are connecting, and then change the
e line you are accessing requires error control to be turned off, do so using the AT command
ed.
You are n
l to be turned off, do so using the AT command
2. If the ISP you are accessing requires access at a decreased baud rate, reconfigure the
communications software to correct the connection baud rate to match the ISP.
b. Restart the server, and then reattempt the connection.
n:
1. Be sure a dial tone exists.
2. Be sure the line is not in use at anothe
4. Be sure the modem on the other end is working.
d connects while online
n:
1. Be sure no loose connections (on page 43 ) exist.
2. Be sure no line interference exists. Retry the connection by dialing the number severa
conditions remain poor, contact the telephone company to have the line tested.
Be sure an incoming call is not breaking the connection due to call wait
and then reestablish the connection.
mand initialization string is not working
Action: Use the most basic string possible to perform the task. The default initialization string is
AT&F&C1&D2&K3.
tio errors are occurring
Action:
baud rate to match.
2. If th
AT&Q6%C0.
3. Be sure no line interference exists. Retry the connection by dialing the number several times. If
conditions remain poor, contact the telephone company to have the line test
4. Be sure the modem is current and compliant with CCITT and Bell standards. Replace with a
supported modem if needed.
u able to connect to an online subscription service
Action:
1. If the line you are accessing requires error contro
AT&Q6%C0.
Troubleshooting 71