HP ProLiant Series ML100 - Manual (Page 26)

6. Install the expansion board.
e the slot cover retainer. 7. Clos
8. Connect any required internal cables to the expansion board.
fer
9. Insta
er bezel, as needed.
11. to the expansion board.
HP T s
e
sections:
1. Insta
2. Retaining the recovery key/password (on page 28 ).
3. Enabling the Trusted Platform Module (on page 29 ).
TPM installation requires the use of drive encryption technology, such as the Microsoft® Windows®
BitLocker™ Drive Encryption feature. For more information on BitLocker™, see the Microsoft website
(
http://www.microsoft.com
Re to the documentation that ships with the expansion board for more information.
ll the access panel.
10. Do one of the following:
o Close or install the tow
o Slide the server back into the rack.
Connect any required external cables
12. Power up the server (on page 6 ).
ru ted Platform Module option
Use thes instructions to install and enable a TPM on a supported server. This procedure includes three
lling the Trusted Platform Module board (on page 27 ).
).
CAUTION: Always observe the guidelines in this document. Failure to follow these guidelines
can cause hardware damage or halt data access.
When installing or replacing a TPM, observe the following guidelines:
• Do not remove an installed TPM. Once installed, the TPM becomes a permanent part of the system
board.
Hardware options installation 26