HP ProLiant Series ML100 - Manual (Page 54)

NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
• Improperly seated or faulty internal or external component
• Unsupported component installed
• Redundancy failure
• System overtemperature condition
Item See
1 Server maintenance and service guide, located on the Easy Set-up CD,
the support CD, or the HP website
(
http://www.hp.com/products/servers/platforms )
2 "Power-on problems flowchart (on page 48 )"
3 "HP Insight Diagnostics"
4 • "Hardware problems (on page 55 )"
• Server maintenance and service guide, located on the Easy Set-up
CD, the support CD, or the HP website
( http://www.hp.com/products/servers/platforms )
5 "HP contact information (on page 90 )"
Troubleshooting 54