HP ProLiant Series ML100 - Manual (Page 7)

CAUTION: Do not operate the server for long periods with the access panel open or removed.
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
1. Power down the server (on page 6 ).
2. Do one of the following:
o Unlock and remove the bezel (" Remove the tower bezel " on page 6 ).
o Extend the server from the rack.
3. Remove the thumbscrew.
4. Slide the access panel back.
5. Lift and remove the access panel.
To replace the component, reverse the removal procedure.
For server-specific information, see the installation sheet that ships with the server.
Operations 7