HP ProLiant Series ML100 - Manual (Page 30)

Software and configuration utilities
ROM-Based Setup Utility
guration utility, performs a wide range of configuration activities that may
ude:
•
ying system information
uide on the Documentation CD
RBSU, an embedded confi
incl
Configuring system devices and installed options
• Displa
• Selecting the primary boot controller
• Configuring memory options
For more information on RBSU, see the HP ROM-Based Setup Utility User G
or the HP website ( http://www.hp.com/support/smartstart/documentation ).
e the following keys:
e the menu system, use the arrow keys.
, press the F1 key.
Using RBSU
To use RBSU, us
• To access RBSU, press the F10 key during power-up when prompted.
• To navigat
• To make selections, press the Enter key.
• To access Help for a highlighted configuration option
IMPORTANT: RBS
not prompt you fo
U automatically saves settings when you press the Enter key. The utility does
r confirmation of settings before you exit the utility. To change a selected
setting, you must select a different setting and press the Enter key.
Default configuration settings are applied to the server at one of the following times:
• Upon the first system power-up
• After defaults have been restored
Default configuration settings are sufficient for proper ty
can be modified using RBSU. The system wil
pical server operation, but configuration settings
l prompt you for access to RBSU with each power-up.
Auto-configuration process
e
stem ROM automatically configures the entire system without needing any
process, the ORCA utility, in most cases, automatically configures the array to a
a of drives connected to the server.
The auto-configuration process automatically runs when you boot the server for the first time. During th
power-up sequence, the sy
intervention. During this
def ult setting based on the number
NOTE: The server may not support all the following examples.
Software and configuration utilities 30