HP ProLiant Series ML100 - Manual (Page 29)

• Always store the recovery key/password in multiple locations.
ver.
Enabling the Trusted Platform Module
he BIOS setup information for the specific procedure to
er.
• Always store copies of the recovery key/password away from the ser
• Do not save the recovery key/password on the encrypted hard drive.
Press the F10 key to access BIOS Setup. See t
enable the TPM on a ProLiant 100 Series serv
CAUTION: When a TPM is installed and enabled on the server, data access is locked if you
fail to follow the proper procedures for updating the system or option firmware, replacing the
ifying OS application TPM settings. system board, replacing a hard drive, or mod
For more information on firmware updates and hardware procedures, see the HP Trusted Platform Module
ite ( http://www.hp.com/support Best Practices White Paper on the HP webs ).
TPM usage in BitLocker™, see the Microsoft website For more information on adjusting
(
http://technet.microsoft.com/en-us/windowsvista/aa905065.aspx ).
Hardware options installation 29