Creating a diskette image, Usb diskette and cd-rom drives, Installing an operating system – HP ProLiant Series ML100 User Manual
Page 37: Installing a supported microsoft® windows® os, G_en, Http://www.hp.com/support/e_sata_raid_c_u
HP Integrated Lights-Out Virtual Floppy and CD-ROM drives
LO10
l
ts-Out User Guide on the
HP websit
0i Advanced provides diskette drive and CD-ROM drive functionality through the LO100i Virtua
Floppy and CD-ROM features.
For detailed information about LO100i Advanced, refer to the HP Integrated Ligh
Creating a diskette image
instructions on the HP website
website, c
Installing the Embedded SATA RAID driver with a USB diskette
drive
OST process will continue.
rmation about creating arrays, see the following documentation:
Embedded SATA RAID Controller User Guide on the HP website
lick the link for "Support and Drivers."
1.
Boot the server, and then press F10 to enter the ROM-Based Setup Utility (RBSU).
2.
Enable the Embedded SATA RAID option under the Advanced Options section.
3.
Exit RBSU. The server will reboot.
4.
When prompted, press F8 to enter the HP Embedded SATA RAID Setup.
5.
Create an array, and then exit the HP Embedded SATA RAID Setup. The P
For info
o
HP
dia ForceWare Software MediaShield User's Guide on the HP website
o
nVi
6.
Install the operating system ("
Installing an operating system
" on page
the documentation that shipped with the server.
Installing the Embedded SATA RAID driver using Virtual Floppy
For information about installing an operating system, see
IMPORTANT:
The LO100i option kit is required to use the Virtual Floppy feature. For more
uide on the HP website
information, see the HP ProLiant Lights-Out Remote Management User G
1.
Ensure that a network cable is connected to the LO100 NIC port on the rear of the server.
2.
Boot the server, and then press F10 to enter the ROM-Based Setup Utility (RBSU).
3.
nab
Exit RBSU. The server will reboot.
E
le the Embedded SATA RAID option under the Advanced Options section.
4.
5.
Create the diskette.
For more information about Virtual Floppy, see the HP ProLiant Lights-Out Remote Management User
Guide on the HP websit
6.
Insert the driver diskette into the remote PC diskette drive.
Software and configuration utilities 37