HP BL860C - Manual (Page 83)

•
bcfg boot mv #a #b – Moves the item number specified by #a to the position
specified by #b in the boot options list.
•
bcfg boot add # file.efi "Description" – Adds a new boot option to the
position in the boot options list specified by # . The new boot option references file.efi
and is listed with the title specified by Description .
For example, bcfg boot add 1 \EFI\redhat\elilo.efi "Red Hat
Enterprise Linux" adds a Red Hat Enterprise Linux item as the first entry in the boot
options list.
Likewise, bcfg boot add 1 \efi\SuSE\elilo.efi "SLES 10" adds a SuSE
Linux item as the first entry in the boot options list.
For details, see the help bcfg command.
4. Exit the console and iLO 2 MP interfaces if you are finished using them.
Enter Ctrl-B to exit the system console and return to the MP Main Menu. To exit the iLO 2 MP,
enter
x at the Main Menu.
Booting the Red Hat Enterprise Linux Operating System
You can boot the Red Hat Enterprise Linux operating system on HP Integrity servers using either of
these methods:
•
Choose a Red Hat Enterprise Linux entry from the EFI Boot Manager Menu.
To load the Red Hat Enterprise Linux operating system at the EFI Boot Manager Menu, choose
its entry from the list of boot options.
Choosing a Linux entry from the boot options list boots the operating system using ELILO.EFI
loader and the elilo.conf file.
•
Initiate the ELILO.EFI Linux loader from the EFI Shell.
On a Red Hat Enterprise Linux boot device EFI System Partition, the full paths to the loader
and configuration files are:
\EFI\redhat\elilo.efi and \EFI\redhat\elilo.conf .
After choosing the file system for the boot device (for example, fs0: ) initiate the Linux loader
from the EFI Shell prompt by entering the full path for the ELILO.EFI loader.
By default the ELILO.EFI loader boots Linux using the kernel image and parameters specified
by the default entry in the elilo.conf file on the EFI System Partition for the boot device.
To interact with the ELILO.EFI loader, interrupt the boot process (for example, enter a space) at
the ELILO boot prompt. To exit the ELILO.EFI loader, use the exit command.
Booting Red Hat Enterprise Linux from the EFI Shell
To boot Red Hat Enterprise Linux from the EFI Shell:
1.
Access the EFI Shell.
From the system console, choose the EFI Shell entry from the EFI Boot Manager Menu to access
the shell.
2. Access the EFI System Partition for the Red Hat Enterprise Linux boot device.
Use the EFI Shell map command to list the file systems ( fs0 , fs1 , and so on) that are known
and mapped.
To choose a file system to use, enter its mapped name followed by a colon ( : ). For example,
to operate with the boot device that is mapped as fs3 , enter fs3: at the EFI Shell prompt.
3. Enter ELILO at the EFI Shell command prompt to launch the ELILO.EFI loader.
If needed, you can specify the loader path by entering \EFI\redhat\elilo at the EFI
Shell command prompt.
Booting and Shutting Down Linux 83