HP BL860C - Manual (Page 125)

Removing a Cache Module
CAUTION: To avoid bending the controller board, only remove or replace the cache module
when it is installed in the server blade.
To remove a cache module:
1.
If the BBWC battery will also be removed:
a.
Back up all data.
b. Close all applications.
2. Power of the server blade and remove it from the enclosure.
See “Preparing the Server Blade for Servicing” (page 110) .
3. Remove the access panel.
See “Removing the Server Blade Access Panel” (page 112) .
4. Remove any mezzanine cards blocking the cache module.
See “Removing a Mezzanine Card” (page 123) .
5. Pull straight up on the cache module to remove it from the controller.
Figure 53 Removing the Cache Module
CAUTION: The BBWC battery must remain connected to the cache module to preserve the
data when removing the cache module to transfer data.
Removing and Replacing a Cache Module 125