beautypg.com

Truecopy operations, Truecopy operations -30 – Hitachi MK-96RD626-07 User Manual

Page 50

background image

2-30

About Universal Volume Manager Operations

Hitachi Universal Storage Platform V/VM Universal Volume Manager User’s Guide

TrueCopy Operations

Figure 2-13 shows the use of an external volume for the TrueCopy operation.

The mapped external volume is set as the S-VOL of the TrueCopy pair, and the
volume in the local storage system that is connected as the multipoint control
unit (MCU) is set as the P-VOL of the TrueCopy pair. For details on TrueCopy,

see the TrueCopy User's Guide.

The procedure for the operation is as follows:
1. Use Universal Volume Manager to map a volume in the external storage

system as an internal volume of the local storage system, which is used as

remote control unit (RCU) for the TrueCopy operation.
You can select the emulation type of the mapped volume as you required.

If you select the emulation type for the open system (such as OPEN-V), go
on to the step 2. If you select the emulation type for the mainframe system
(such as 3390-3), go on to the step 3.

2. If you set the emulation type for the open system when you map the

volume, the status of the mapped volume automatically becomes Normal.
However, the volume formatting processing is not executed automatically.
If you need to format the mapped volume, format the volume using the

VLL function.
For the volume formatting operation procedure, see the Virtual LVI/LUN

and Volume Shredder User's Guide.
Go on to the step 4.

3. If you set the emulation type for the mainframe system when you map the

volume, the status of the mapped volume becomes Blockade. Format the

volume using the VLL function. Or if you have mapped the volume for
which the data area has already been zero-formatted on the external
storage system side, perform the Write to Control Blocks operation using

the VLL function to restore the volume.
For the volume formatting operation procedure and the Write to Control

Blocks operation procedure, see the Virtual LVI/LUN and Volume Shredder
User's Guide
.
Go on to the step 4.

4. Set the P-VOL and S-VOL of the TrueCopy pair.