Hitachi MK-96RD626-07 - Manual (Page 184)

A-18 Connecting External Storage Systems
Hitachi Universal Storage Platform V/VM Universal Volume Manager User’s Guide
System Parameter Settings for Connecting Sun StorageTek
FlexLine 380
When you connect a Sun StorageTek FlexLine 380 as an external storage
system, set the system parameters of the Sun StorageTek FlexLine 380
according to the following table. For the system parameters that are not in the
following table, refer to the documentation of the Sun StorageTek FlexLine 380
and set the parameters appropriately for the connecting configuration.
Table A-16 System Parameter Settings for Connecting Sun StorageTek
FlexLine 380
Parameter Parameter Setting
host type Windows Non-clustered (DMP Support)
System Parameter Settings for Connecting Sun StorageTek
2540
When you connect a Sun StorageTek 2540 as an external storage system, set
the system parameters of the Sun StorageTek 2540 according to the following
table. For the system parameters that are not in the following table, refer to
the documentation of the Sun StorageTek 2540 and set the parameters
appropriately for the connecting configuration.
Table A-17 System Parameter Settings for Connecting Sun StorageTek
2540
Parameter Parameter Setting
host type Windows 2K non Clustered DMP
Cross-Subsystem Paths for Connecting Sun StorageTek
V2X2
When you connect a Sun StorageTek V2X2 as an external storage system,
make sure that only one cross-subsystem path is configured when you map
external volumes. Do not add any alternate paths after you finish mapping
external volumes.