Hitachi MK-96RD626-07 - Manual (Page 146)

6-6 Using Spreadsheets for Universal Volume Manager Operations
Hitachi Universal Storage Platform V/VM Universal Volume Manager User’s Guide
Mapping External Volumes (AddVolumeSetting Tag)
You can map external volumes to the local storage system by specifying a
spreadsheet that includes the AddVolumeSetting tag when you execute the
CFLSET command using the Storage Navigator CLI.
Write parameters required for mapping external volumes in the
AddVolumeSetting tag. Parameters must be written in a hierarchical structure
by using the "+" identifier. The following table shows the structure and
identifier of the parameters that can be set for the AddVolumeSetting tag.
Table 6-6 Structure and Identifier of AddVolumeSetting Tag Parameters
Layer Identifier Content Description
The first
layer
None Information about
external volumes
and the primary
path This layer is required.
The second
layer
+, Information about
alternate paths Specifies one row for each alternate path. Up to seven
rows can be specified. It is recommended that you
specify at least one alternate path.
The third
layer
+,+, Information about
LDEVs Specifies one row for each LDEV. Up to 2,048 rows
can be specified. If you do not specify the third layer,
no LDEVs will be created.