Hitachi MK-96RD626-07 - Manual (Page 167)

A
Connecting External Storage Systems A-1
Hitachi Universal Storage Platform V/VM Universal Volume Manager User’s Guide
Connecting External Storage Systems
TagmaStore AMS/WMS Storage System
System Parameters for Connecting TagmaStore
AMS/WMS Storage System
The table below explains whether to specify system parameters when making
settings on ports on the TagmaStore AMS and WMS storage systems.
Note: When you connect a TagmaStore AMS or WMS storage system, use LUN
Manager to set the data transfer speed of the external port which you use to a
fixed value other than the Auto. Also, set the data transfer speed of the target
port of the AMS/WMS storage system to the fixed value according to the data
transfer speed of the external port.
Table A-1 System Parameter Settings (AMS/WMS)
Window Names Parameters Parameter Settings
Start Attribute
Single Mode Specify this parameter when AMS/WMS storage
system is in the one controller configuration.
Dual Active Mode Specify this parameter when AMS/WMS storage
system is in the two controller configuration.
Delay Planned Shutdown You can either specify this parameter or omit
specifying this parameter.
Drive blocking mode You can either specify this parameter or omit
specifying this parameter.
Vendor ID Keep this parameter as HITACHI (default), and do
not change.
Product ID Keep this parameter as DF600F (default), and do
not change.
Boot Options
ROM Microprogram Version You can either specify this parameter or omit
specifying this parameter.