Epson EM07ZS1647F - Manual (Page 39)

2. Installation
2.7.2 Specifications
Part Number applicom PCI-DVNIO / PCU-DVNIO
Modes Master/Slave
Baud rates 125, 250, 500 kbps
Interface 1 DeviceNet port
Supported Devices Group 2 Only Server and U.C.M.M. capable
Maximum Nodes 63
Connection Types Strobe, Polling, Cyclic and Change of State
Explicit Messaging Yes
EDS Support Yes
Input Data Size 1 to 255 bytes
Output Data Size 1 to 255 bytes
Automatic Detection Yes. Devices can be detected automatically.
2.7.3 Software Installation
Before installing any boards in your controller, you must install the applicomIO console
application and drivers for the type of board you will be using.
(1) Start the controller.
(2) Run the C:\Install\FieldBus\Install\applicomIO\Disk1\Setup.EXE from the install
folder in the controller to start the installation.
(3) Select the desired language for the installer.
(4) Select Install Products.
(5) Select applicomIO. Do not select applicomIO ActiveX.
Fieldbus I/O Rev.6 27