Vivotek NR9682-v2 64-Channel NVR (No HDD) - Manual (Page 95)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 95
Minimum System Requirements
Before installing the VAST software, please make sure your system meets the following
recommended minimum system requirements.
VAST 2 Liveview & Playback
Operating System
Windows Server 2012, 2016 / Windows 10, 7 / MacOS 10.15 Catalina
(Server core installation type is not supported.)
Clients
(Display
Channels)
720P,2Mbps,
H.264,* each CH
8 CH 16 CH 32 CH
1080P,4Mbps,
H.264**, each CH
6 CH 10 CH 18 CH
1080P,4Mbps,
H.265, each CH
3 CH 5 CH 9 CH
CPU
6th Generation Intel ®
Core™ i3 Processors
6th Generation Intel ®
Core™ i5 Processors
6th Generation Intel ®
Core™ i7 Processors
RAM*** 8GB or above 8GB or above 16GB or above
Network Interface Card Ethernet, 1Gbit recommended
Graphics Card**** Direct3D acceleration with 1GB RAM graphics card
VAST2 Server
Operating System
Windows 10, 7, Windows Server 2012, 2016 (Server core installation type is
not supported.)
Server (Recording Channels) Up to 64 CH Up to 128 CH Up to 256 CH
CPU
6th Generation Intel ® Core™ i3 Processors or
above
6th Generation Intel ® Core™
i5 Processors or above
RAM**** 4 GB or above 8GB or above 8GB or above
Hard Drive (Enterprise model
only), suggestion
1 Volume Group* 2 Volume Group* 4 Volume Group*
Recording throughput 1 Volume Group: Max. 200Mbps (Max.)**
Network Interface Card Ethernet, 1Gbit recommended***
* The size of volume group depends on the total recording server throughput.
** The maximum combined bit rate of cameras cannot exceed the total recording throughput.
*** Please consider the combined throughput of viewing, recording, and server's network
bandwidth when designing your surveillance deployments.
**** Please use a dual-channel memory configuration.