Vivotek NR9682-v2 64-Channel NVR (No HDD) - Manual (Page 10)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions
10 - User's Manual
Grounding Requirements
1. The enclosure is designed to be rack-mounted, in an equipment room which has limited hu-
man access.
2. In addition to the grounding via the power cords, make sure your equipment rack is properly
grounded. If the equipment rack is not properly grounded, connect the ground wire to a go-
runding bus bar, which is then connected to an earth ground.
3. Use a ground wire of a copper cross section of at least 16AWG.
Ground screw
Main grounding bus
bar
Rack ground bar
Earth
ground
Mesh common bonding