Failover configuration process – Vivotek NR9682-v2 64-Channel NVR (No HDD) User Manual
Page 185
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 185
Before Failover configuration, you need to add other servers to your Failover configuration.
Below is a screen from the Sites management window.
•
If you are adding a Redundant server, select the "
Add as a redundant server
" checkbox.
•
If you are adding a server without selecting this checkbox, it will be considered as an Active
server.
•
When adding a Redundant server, you will need to provide a Windows account 802.1x
domain user name and password. A Redundant server requires this because a full access to
the recorded data is required during the failover and failback process.
Failover Configuration Process