444) and, 444) or remote cord, 444) wir – Nikon D750 DSLR Camera (Body Only) User Manual
Page 472
444
Software
Camera Control Pro 2
: Control the camera remotely from a
computer to record movies and photographs and save
photographs directly to the computer hard disk. When
Camera Control Pro 2 is used to capture photographs
directly to the computer, the PC connection indicator
(
c
) will appear in the control panel.
Note
: Use the latest versions of Nikon software; see the websites listed on
page xxiii for the latest information on supported operating systems. At
default settings, Nikon Message Center 2 will periodically check for updates
to Nikon software and firmware while you are logged in to an account on the
computer and the computer is connected to the Internet. A message is
automatically displayed when an update is found.
Remote
controls/
wireless remote
controller
(
193)
•
Wireless Remote Control ML-L3
: The ML-L3 uses a 3 V CR2025
battery.
Pressing the battery-chamber latch to the right (
q
),
insert a fingernail into the gap and open the battery
chamber (
w
). Ensure that the battery is inserted in the
correct orientation (
r
).
•
Wireless Remote Controller WR-R10/WR-T10
: When a WR-R10
wireless remote controller is attached, the camera can
be controlled wirelessly using a WR-T10 wireless
remote controller.
•
Wireless Remote Controller WR-1
: The WR-1 can function as
either a transmitter or a receiver and is used in
combination either with another WR-1 or a WR-R10 or
WR-T10 wireless remote controller. For example, a
WR-1 can be connected to the accessory terminal for
use as a receiver, allowing camera settings to be
changed or the shutter to be released remotely by
another WR-1 acting as a transmitter.
Availability may vary with country or region. See our website or brochures for the latest
information.