195 a – Nikon D750 DSLR Camera (Body Only) User Manual
Page 223
195
A
Using the Built-in Flash
Before taking a photograph with the flash in manual pop-up modes
(
182), press the
M
(
Y
) button to raise the flash and wait for the
M
indicator to be displayed in the viewfinder (
11). Shooting will be
interrupted if the flash is raised while remote control mode is in effect.
If the flash is required, the camera will only respond to the ML-L3
shutter-release button once the flash has charged. In auto pop-up
modes (
180), the flash will begin charging when remote control
mode is selected; once the flash is charged, it will automatically pop up
and fire when required.
In flash modes that support red-eye reduction, the red-eye reduction
lamp will light for about one second before the shutter is released. In
delayed remote mode, the self-timer lamp will light for two seconds,
followed by the red-eye reduction lamp which lights for one second
before the shutter is released.
A
Focusing in Remote Control Mode
The camera will not adjust focus continuously when continuous-servo
autofocus is selected; note however that regardless of the autofocus
mode selected, you can focus by pressing the camera shutter-release
button halfway before shooting. If auto- or single-servo autofocus is
selected or the camera is in live view in delayed or quick-response
remote mode, the camera will automatically adjust focus before
shooting; if the camera is unable to focus in viewfinder photography, it
will return to stand-by without releasing the shutter.
A
Remote Mirror-up Mode
While the mirror is raised, photos can not be framed in the viewfinder
and autofocus and metering will not be performed.
A
Exiting Remote Control Mode
Remote control is cancelled automatically if no photograph is taken
before the time selected for Custom Setting c5 (
Remote on duration
(ML-L3)
,
Off
is selected for
Remote control mode (ML-L3)
, a
two-button reset is performed (
199), or shooting options are reset
using
Reset photo shooting menu
(