Nikon D750 DSLR Camera (Body Only) User Manual
Page 186
158
6
Check the results.
If the camera was able to measure
a value for white balance,
C
will flash in the control panel for
about six seconds, while the
viewfinder will show a flashing
a
.
If lighting is too dark or too bright,
the camera may be unable to
measure white balance. A flashing
b a
will appear in the control
panel and viewfinder for about six
seconds. Press the shutter-release
button halfway to return to Step 5
and measure white balance again.
D
Direct Measurement Mode
If no operations are performed during viewfinder photography while
the displays are flashing, direct measurement mode will end in the
time selected for Custom Setting c2 (
Standby timer
,
A
Selecting a Preset
Selecting
Preset manual
for the
White
balance
option in either of the shooting
menus displays the dialog shown at right;
highlight a preset and press
J
. If no value
currently exists for the selected preset, white
balance will be set to 5200 K, the same as
Direct sunlight
.
Control panel
Viewfinder
Control panel
Viewfinder