Nikon D750 DSLR Camera (Body Only) - Manual (Page 312)

284
WPS (Android Only)
1
Enable the camera’s built-in Wi-Fi.
Highlight Wi-Fi in the setup menu and
press 2 . Highlight Network
connection and press 2 , then
highlight Enable and press J . Wait a
few seconds for Wi-Fi to activate.
2
Connect.
Enable WPS button connections on the camera and smart
device:
• Camera : Highlight Network settings
and press 2 .
Highlight Push-button WPS and
press 2 to ready the camera for a
WPS connection. The camera will
wait about two minutes for a WPS
connection request from the smart
device. To extend the wait time,
press
J .
• Smart device : Select Wi-Fi settings > WPS button
connection .