Nikon D750 DSLR Camera (Body Only) - Manual (Page 375)

347
Choose the flash mode for the built-in flash.
❚❚
Manual
Choose a flash level. Flash level is stated in fractions of full
power: at full power, the built-in flash has a Guide Number of 12/
39 (m/ft, ISO 100, 20°C/68°F).
❚❚
Repeating Flash
The flash fires repeatedly while the
shutter is open, producing a strobe-
light effect. Press
4 or 2 to highlight
the following options, 1 or 3 to
change.
e3: Flash Cntrl for Built-in Flash
G button
➜
A Custom Settings menu
Option Description
1
TTL
Flash output is adjusted automatically in
response to shooting conditions.
2
Manual
Choose the flash level ( 0 347). The camera
does not emit monitor pre-flashes.
3
Repeating flash
The flash fires repeatedly while the shutter is
open, producing a strobe-light effect (
0 347).
4
Commander mode
Use the built-in flash as a master flash
controlling remote optional flash units in one
or more groups (
0 348).
Option Description
Output Choose flash output (expressed as a fraction of full power).
Times
Choose the number of times the flash fires at the selected
output. Note that depending on shutter speed and the
option selected for
Frequency , the actual number of flashes
may be less than selected.
Frequency Choose how often the flash fires per second.