Transferring settings from a computer – Epson EpiqVision Flex CO-W01 3000-Lumen WXGA 3LCD Projector User Manual
Page 88
88
Transferring Settings from a Computer
After saving projector settings to a computer, you can transfer them to another projector of the same
model.
Your computer must be running one of the following operating systems:
• Windows 8.x
• Windows 10
• Windows 11
• macOS 10.12.x or later
Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have
to repeat your adjustments.
1.
Turn off the projector and unplug the power cord from the projector's power inlet.
2.
Connect a USB cable to your projector's
USB-B
port.
3.
Connect the other end to any available USB port on your computer.
4.
Press and hold the
menu button on the control panel or remote control as you turn on the power
switch.
5.
When the status light turns on, release the
menu button.
The projector shows up as a removable disk on your computer.
6.
Copy the
pjconfdata.bin
file from your computer to the removable disk.
Note:
Do not copy any other files to the removable disk.
7.
Once the file has copied, do one of the following:
•
Windows:
Open the
My Computer
,
Computer
,
Windows Explorer
, or
File Explorer
utility.
Right-click the name of your projector (listed as a removable disk) and select
Eject
.
•
Mac:
Drag the removable disk icon for your projector from the desktop into the trash.
Disconnect the USB cable. When the status indicator stops flashing, the projector turns off.
Caution:
Do not unplug the power cord while the light is flashing. This could damage the projector.
Parent topic: