Setting the screen type – Epson EpiqVision Flex CO-W01 3000-Lumen WXGA 3LCD Projector User Manual

Page 58

Select

Settings

Installation

Image Shift

to display the Image Shift screen.

Use the arrow buttons on the remote control to adjust the image position.

Note:

You can shift the image diagonally by pressing any pair of adjacent arrow buttons on the

remote control.

Press

return to close the Image Shift screen.

Note:

The Image Shift setting is retained even if the projector is turned off; however, you need to

readjust the image position if you change the projector's location or angle.

Parent topic:

Using Basic Projector Features

Setting the Screen Type

You can use the Screen Type setting to match the aspect ratio of the displayed image to the screen you
are using.

Note:

This setting is unavailable when using the

USB Display

USB

LAN

input source.

Note:

The Screen Type setting is not supported by the Message Broadcasting feature in the Epson

Projector Management software.

Turn on the projector and display an image.

Press the

menu button.