Epson EpiqVision Flex CO-W01 3000-Lumen WXGA 3LCD Projector - Manual (Page 44)

44
Note: The web setup and control features support Microsoft Edge (Windows), Safari (Mac), and Chrome
(Android) on networks that do not use a proxy server for connection. You cannot select all of the
projector menu settings or control all projector functions using a web browser.
Note: If you set Standby Mode to Communication On , you can use a web browser to select settings
and control projection even if the projector is in standby mode.
1. Make sure the projector is turned on.
2. Start your web browser on a computer or device connected to the network.
3. Type the projector's IP address into the browser's address box and press the computer's Enter key.
Note: You may need to log in to access some of the options on the Web Control screen. If you see a
log in window, enter your user name and password. (For the Basic Control option, the default user
name is
EPSONREMOTE and the default password is the projector's serial number in lower case.
For all other options, the default user name is EPSONWEB and the default password is the
projector's serial number in lower case.) After the first time you enter the password, you will be
prompted to change it.