Projector connections, Connecting to an hdmi video source – Epson EpiqVision Flex CO-W01 3000-Lumen WXGA 3LCD Projector User Manual
Page 28
28
1.
Pass the safety wire through the security cable attachment point on the projector.
2.
Attach the other end of the safety wire to a structure that is strong enough to bear the projector's
weight. If the wire is too long, loop the wire around so that there is as little slack as possible.
Parent topic:
Projector Connections
See these sections to connect the projector to a variety of projection sources.
Caution:
If you will use the projector at altitudes above 4921 feet (1500 m), turn on
High Altitude Mode
to ensure the projector's internal temperature is regulated properly.
Caution:
Check the shape and orientation of the connectors on any cable you plan to connect. Do not
force a connector into a port if it does not fit. The device or your projector could be damaged or could
malfunction.
Connecting to an HDMI Video Source
Connecting to a Computer for USB Video and Audio
Connecting to a USB Device
Parent topic:
Connecting to an HDMI Video Source
If your video source has an HDMI port, you can connect it to the projector using an optional HDMI cable.
The HDMI connection provides the best image quality.