Epson EpiqVision Flex CO-W01 3000-Lumen WXGA 3LCD Projector User Manual
Page 101
101
Event ID code
Cause and solution
0432
Turn the projector off and then on again.
0435
0434
Unstable network communication. Check the network communication status, wait a
few moments, and try connecting to the network again.
0481
0482
0485
0433
Cannot display the transferred images. Restart the network software.
0484
Communication with computer was disconnected. Restart the network software.
0483
The network software quit unexpectedly. Check the network communication status,
then turn the projector off and then on again.
04FE
0479
A projector system error has occurred. Turn the projector off and then on again.
04FF
0891
Cannot find an access point with the same SSID. Set your computer, access point,
and projector to the same SSID.
0892
The WPA/WPA2/WPA3 authentication type does not match. Make sure the wireless
network security settings are correct.
0893
The TKIP/AES encryption type does not match. Make sure the wireless network
security settings are correct.
0894
Communication with an unauthorized access point was disconnected. Contact your
network administrator.
0895
Communication with a connected device was disconnected. Check your device
connection status.
0898
Failed to acquire DHCP. Make sure the DHCP server is operating correctly. If you
are not using DHCP, turn off the
DHCP
setting in the Network menus.
0899
Communication error. Turn the projector off and then on again.
Parent topic: