Password security types, Setting a password – Epson EpiqVision Flex CO-W01 3000-Lumen WXGA 3LCD Projector User Manual
Page 79
79
Creating a User Pattern to Display
Installing a Security Cable
Parent topic:
Password Security Types
You can set up these types of password security using one shared password:
•
Power On Protection
password prevents anyone from using the projector without first entering a
password.
•
User's Logo Protection
password prevents anyone from changing the custom screen the projector
can display when it turns on. The presence of the custom screen discourages theft by identifying the
projector’s owner.
•
Network Protection
password prevents anyone from changing the network settings in the projector
menus.
Setting a Password
Selecting Password Security Types
Entering a Password to Use the Projector
Saving a User's Logo Image to Display
Parent topic:
Setting a Password
To use password security, you must set a password.
Note:
The default password is set to
0000
.
1.
Hold down the
Freeze
button on the remote control for about five seconds or until you see the
Password Protection
menu.
2.
Press the down arrow to select
Password
and press
Enter
.
You see the prompt "Change the password?".
3.
Select
Yes
and press
Enter
.