Epson EpiqVision Flex CO-W01 3000-Lumen WXGA 3LCD Projector - Manual (Page 59)

59
3. Select Settings > Installation > Screen > Screen Type .
4. Select your screen's aspect ratio and press Enter .
5. Press the menu button to exit.
6. Adjust the aspect ratio for the projected image, if necessary.
Adjusting the Image Position Using Screen Position
Parent topic: Using Basic Projector Features
Related references
Projector Feature Settings - Settings Menu
Adjusting the Image Position Using Screen Position
You can adjust the image position if there are margins between the edge of the image and the projected
screen frame.
Note: You cannot adjust the screen position if the Screen Type setting is set to 16:10 .
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select Settings > Installation > Screen > Screen Position .
4. Use the arrow buttons on the remote control or projector to adjust the position of the image.
5. When you are finished, press the return button.
Parent topic: Setting the Screen Type
Related references
Projector Feature Settings - Settings Menu
Image Aspect Ratio
The projector can display images in different width-to-height ratios called aspect ratios. Normally the
input signal from your video source determines the image's aspect ratio setting. However, for certain
images you can change the aspect ratio to fit your screen.
If you always want to use a particular aspect ratio for a certain video input source, you can select it using
the projector's menus.
Changing the Image Aspect Ratio
Available Image Aspect Ratios