Epson EpiqVision Flex CO-W01 3000-Lumen WXGA 3LCD Projector User Manual
Epson Projectors
Table of contents
Document Outline
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Using the Projector on a Network
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Remote Control Operation
- Selecting the Language for the Projector Menus
- Selecting an Image Source
- Projection Modes
- Adjusting the Image Height
- Adjusting the Image Position Using Image Shift
- Setting the Screen Type
- Image Aspect Ratio
- Image Shape
- Focusing the Image Using the Focus Lever
- Displaying a Test Pattern
- Resizing the Image Using Zoom
- Color Mode
- Adjusting Picture Quality in Detail
- Controlling the Volume with the Volume Buttons
- Adjusting Projector Features
- Adjusting the Menu Settings
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Solving Projector or Remote Control Operation Problems
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When "No Signal" Message Appears
- Solutions When the Image is Not Rectangular
- Solutions When the Image is Fuzzy or Blurry
- Solutions When Only a Partial Image Appears
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Flickering
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions When the Image is Upside Down
- Solutions When Image is Incorrect Using the USB Display Function
- Solutions to Sound Problems
- Solutions to Password Problems
- Solutions to HDMI Link Problems
- Solutions When a Message to Replace the Projector is Displayed
- Where to Get Help (U.S. and Canada)
- Where to Get Help (Latin America)
- Technical Specifications
- Notices