Epson POWERLITE 1810P - Manual

Zoom
Focus
1
Locate the required cables:
2
Connect the computer cable to the blue
Computer1 port on the projector.
3
Connect the other end to your notebook’s
video-out or monitor port.
NOTE: If your notebook has a DVI connector, you need to use an
optional DVI-to-VGA adapter with the included computer cable
(see your computer’s documentation).
4
Connect the power cord to the
projector, then plug the other end
into an electrical outlet.
1
Turn on your notebook.
2
Open the A/V Mute slide (lens cover).
NOTE: The slide must be
opened completely.
3
Make sure the Power light
is orange and not flashing.
4
Press the Power button
to turn on the projector.
ST
A
RT
HERE
T
urn on your equipment
C
onnect the projector
to your notebook
PowerLite
®
1810p
Quick Setup
Power cord VGA computer cable
1
If you’ve turned on your notebook and you don’t see an image, press
the Source Search button on the projector or the Search button on
the remote control to select the image source.
NOTE: If you still see a blank screen or have other display problems,
see the troubleshooting tips on the back of this sheet.
2
To raise the image, press
the foot release button
for the front adjustable
foot and lift the front.
Release the button to
lock the foot in position.
3
Turn the focus ring to sharpen the image.
Turn the zoom ring to reduce or
enlarge the image.
4
If your image looks like , , , or , press the Quick Setup
button on the projector and follow the on-screen instructions.
A
djust the image
To shut down the projector:
1. Press the Power button twice.
2. When the orange light stops flashing and the projector beeps,
you can unplug the projector.
Turn over
Power light
Power button
Before using the projector, make sure you read the safety
instructions in the User´s Guide on your projector CD.
Follow these instructions to connect the projector to your notebook.
For other setup options, see your User’s Guide.