Installing the wireless lan module, Selecting wireless network settings manually – Epson EpiqVision Flex CO-W01 3000-Lumen WXGA 3LCD Projector User Manual
Page 35
35
Installing the Wireless LAN Module
To use the projector over a wireless network, install the Epson 802.11b/g/n wireless LAN module in the
projector. Do not install any other type of wireless module.
Note:
The wireless LAN module is not included with your projector and is optional.
1.
Turn off the projector and unplug the power cord.
2.
Insert the wireless LAN module into the
USB-A
port.
3.
Plug in and turn on the projector.
The light on the wireless LAN module turns on when the module is installed and operating. The light
flashes when the module is communicating over the network.
Caution:
Never remove the module while its indicator is blue or flashing, or while you are projecting
wirelessly. This could damage the module or lose data.
Parent topic:
Selecting Wireless Network Settings Manually
Before you can project from your wireless network, you must select the network settings for the projector
using its menu system.
1.
Turn on the projector.
2.
Press the
Menu
button.
3.
Select the
Network
menu and press
Enter
.
4.
Make sure the
Wireless LAN Power
setting is set to
On
.
5.
Select
Network Configuration
and press
Enter
.
6.
Select the
Basic
menu and press
Enter
.
7.
Select the following basic options as necessary:
•
Projector Name
lets you enter a name up to 16 alphanumeric characters long to identify the
projector over the network.
•
Remote Password
lets you enter a password up to 32 alphanumeric characters long for
accessing the projector using Basic Control. (Default user name is
EPSONREMOTE
; default
password is the projector's serial number.)