Epson EpiqVision Flex CO-W01 3000-Lumen WXGA 3LCD Projector - Manual (Page 74)

74
4. Do one of the following:
• To display an individual image, press the arrow buttons to highlight the image and press Enter .
(Press the return button to return to the file list screen.)
• To display a slide show of all the images in a folder, press the arrow buttons to highlight the
Slideshow option at the bottom of the screen and press Enter .
Note: If any file names are longer than the display area or include unsupported symbols, the file
names may be shortened or changed only in the screen display.
5. While projecting, use the following commands to control the display as necessary:
• To rotate a displayed image, press the up or down arrow button.
• To move to the next or previous image, press the left or right arrow button.
6. To stop the display, follow the on-screen instructions or press the return button.
7. Turn off the USB device, if necessary, and then disconnect the device from the projector.
Parent topic: Projecting a PC Free Presentation
Starting a PC Free Movie Presentation
After connecting a USB device or digital camera to the projector, you can switch to the USB input source
and start your movie.
Note: You can change the operation options by highlighting Option at the bottom of the screen and
pressing Enter .
1. Press the Source Search button on the remote control.
2. Select the USB source.