Epson 485Wi User Manual
Brightlink
Table of contents
Document Outline
- Front
- Contents
- Introduction to Your Projector
- Setting Up the Projector
- Projector Placement
- Installing the Projector Feet
- Removing and Attaching the Cable Cover
- Projector Connections
- Installing Batteries in the Remote Control
- Installing Batteries in the Pens
- Using the Projector on a Network
- Wired Network Projection
- Wireless Network Projection
- Setting Up Projector Network E-Mail Alerts
- Setting Up Monitoring Using SNMP
- Controlling a Networked Projector Using a Web Browser
- Crestron RoomView Support
- Using Basic Projector Features
- Turning On the Projector
- Turning Off the Projector
- Selecting the Language for the Projector Menus
- Adjusting the Image Height
- Image Shape
- Resizing the Image with the Wide and Tele Buttons
- Adjusting the Image Position
- Focusing the Image
- Remote Control Operation
- Selecting an Image Source
- Projection Modes
- Image Aspect Ratio
- Color Mode
- Controlling the Volume with the Volume Buttons
- Projecting a Slide Show
- Adjusting Projector Features
- Using the Interactive Pens
- Using the Pens
- Using BrightLink With a Computer
- Easy Interactive Tools
- Easy Interactive Tools System Requirements
- Installing Easy Interactive Tools
- Starting and Exiting Easy Interactive Tools
- Using the Easy Interactive Tools for Interactive Mode
- Using Easy Interactive Annotation Tools
- Using the Easy Interactive Tools for Whiteboard Mode
- Using Easy Interactive Tools for Saving, Printing, and More
- Windows Tablet PC and Ink Tools
- Using BrightLink Without a Computer
- Adjusting the Menu Settings
- Maintaining and Transporting the Projector
- Solving Problems
- Projection Problem Tips
- Projector Light Status
- Using the Projector Help Displays
- Solving Image or Sound Problems
- Solutions When No Image Appears
- Solutions When Image is Incorrect Using the USB Display Function
- Solutions When "No Signal" Message Appears
- Solutions When "Not Supported" Message Appears
- Solutions When Only a Partial Image Appears
- Solutions When the Image is Not Rectangular
- Solutions When the Image Contains Noise or Static
- Solutions When the Image is Fuzzy or Blurry
- Solutions When the Image Brightness or Colors are Incorrect
- Solutions When There is No Sound or Low Volume
- Solutions to Microphone Problems
- Solving Projector or Remote Control Operation Problems
- Solving Interactive Pen Problems
- Solutions When "Hardware Device Not Found" Message Appears
- Solutions When "Error Occurred in the Easy Interactive Function" Message Appears
- Solutions When the Interactive Pens Do Not Work
- Solutions When Manual Calibration is Difficult
- Solutions When the Built-In Toolbar Does Not Work
- Solutions When the Interactive Pen Position Is Not Accurate
- Solutions When the Interactive Pens Are Slow or Difficult to Use
- Solutions When the Interactive Pens Cause Interference or Unwanted Effects
- Solutions When Network Alert E-Mails are Not Received
- Where to Get Help
- Technical Specifications
- General Projector Specifications
- Projector Lamp Specifications
- Remote Control Specifications
- Projector Dimension Specifications
- Projector Electrical Specifications
- Projector Environmental Specifications
- Projector Safety and Approvals Specifications
- Supported Video Display Formats
- USB Display System Requirements
- Notices