Changing the image aspect ratio, Available image aspect ratios – Epson EpiqVision Flex CO-W01 3000-Lumen WXGA 3LCD Projector User Manual
Page 60

60
Parent topic:
Using Basic Projector Features
Related references
Image Quality Settings - Image Menu
Changing the Image Aspect Ratio
1.
Turn on the projector and switch to the image source you want to use.
2.
Press the
menu button on the projector remote control.
3.
Select the
Image
menu and press
Enter
.
4.
Select
Aspect
and press
Enter
.
5.
Select the aspect ratio you want to use for your input signal and press
Enter
.
6.
Press the
menu button or the
return button to exit the menus.
Parent topic:
Related references
Image Quality Settings - Image Menu
Available Image Aspect Ratios
You can select the following image aspect ratio settings, depending on the input signal from your image
source.
Note:
Using the aspect ratio function to reduce, enlarge, or split the projected image for commercial
purposes or for public viewing may infringe upon the rights of the copyright holder of that image based
on copyright law.
Aspect ratio setting
Description
Auto
Automatically sets the aspect ratio according to the input signal.
16:9
Converts the aspect ratio of the image to 16:9.
Full
Displays images using the full width of the projection area, but does
not maintain the aspect ratio.
Zoom
Displays images using the full width of the projection area and
maintains the aspect ratio of the image.
Native
Displays images as is (aspect ratio and resolution are maintained).