Epson WorkForce WF-2960 Wireless All-in-One Color Inkjet Printer - Manual (Page 41)

41
4. Select Start Setup or Change Settings .
5. Select Push Button Setup (WPS) .
6. Follow the instructions on the LCD screen to complete WPS setup.
Note: Make sure you select Start Setup within two minutes of activating WPS on your router.
7. Press the home button to return to the Home screen.
The Wi-Fi icon is displayed on the LCD screen and indicates your wireless connection status. If
the product is not connected to the network, repeat these steps to try again.
If you are printing from a computer, make sure you installed the network software as described on
the
Start Here sheet.
Parent topic: Wi-Fi Protected Setup (WPS)
Related references
Status Icon Information
Printing a Network Status Sheet
You can print a network status sheet to help you determine the causes of any problems you may have
using your product on a network.
1. Make sure a few sheets of plain paper are loaded in the product.
2. Press the home button, if necessary.
3. Select Settings > General Settings > Network Settings > Network Status > Print Status Sheet .
4. Select Print to print the status sheet.
Examine the settings shown on the network status sheet to diagnose any problems you have.
Parent topic: Wi-Fi or Wired Networking
Related topics
Loading Paper
Printing a Network Connection Report
You can print a network connection report to view solutions to any problems you may have using your
product on a network.
1. Make sure a few sheets of plain paper are loaded in the product.