Product makes noise when it sits for a while, Copies have incorrect or faint colors – Epson WorkForce WF-2960 Wireless All-in-One Color Inkjet Printer User Manual

Page 261

261

Print Head Nozzle Check

Product Makes Noise When It Sits for a While

Your product is performing routine maintenance. This is normal.

Parent topic:

Solving Copying Problems

Originals Do Not Feed From the Automatic Document Feeder

If your originals do not feed when placed in the ADF, try these solutions:

• Make sure the

ADF

icon lights up on the Copy, Fax, or Scan screen on the LCD screen. If not, reload

the originals.

• Make sure the size, weight, and number of your originals are supported by the ADF.

• Make sure the originals are loaded correctly.

• Slide the edge guides against the edges of the originals.

• Make sure the document is not curled or creased.

• Try cleaning the inside of the ADF.

• Do not load originals above the arrow mark on the ADF edge guide.

Parent topic:

Solving Copying Problems

Related references

Copies Have Incorrect or Faint Colors

If your copies have incorrect, uneven, smeared, or faint colors, try these solutions:

• Run a print head nozzle check to see if any of the nozzles are clogged. Then clean the print head, if

necessary.

• Do not press too hard on the original when you copy from the scanner glass.

• Clean the scanner glass with a soft, dry, lint-free cloth or use a small amount of glass cleaner on the

cloth, if necessary. Paper towels are not recommended.