Epson WorkForce WF-2960 Wireless All-in-One Color Inkjet Printer User Manual

Page 284

284

• Use a support sheet with special paper, or load special paper one sheet at a time.

• Make sure your paper meets the specifications for your product.

• Use Epson papers to ensure proper saturation and absorption of genuine Epson inks.

• Make sure the paper type setting in your product software matches the type of paper you loaded.

• When manually printing 2-sided, make sure the ink is completely dry before loading the paper.

• Remove each sheet from the output tray as it is printed.

• Avoid handling printouts on glossy paper right after printing to allow the ink to set.

• Turn off any high speed settings in your product software.

• When vertical banding appears or the paper is smeared, clean the paper path.

• When horizontal banding appears or the top or bottom of the paper is smeared, load paper in the

correct direction and slide the edge guides to the edges of the paper.

• If you print on both sides of a sheet of paper, smudges may appear on the reverse side of heavily

saturated or dark images. If one side of a sheet will contain a lighter image or text, print that side first.
Make sure the ink has dried before reloading the paper to print on the other side. Adjust the density
and/or ink drying time settings.

• Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if

necessary.

Note:

Your product will not operate properly while tilted at an angle. Place it on a flat, stable surface that

extends beyond the base of the product in all directions.

Parent topic:

Solving Print Quality Problems

Related concepts

Print Head Nozzle Check
Print Head Cleaning

Related references

Paper Specifications
Compatible Epson Papers
Paper or Media Type Settings - Printing Software