Print head cleaning – Epson WorkForce WF-2960 Wireless All-in-One Color Inkjet Printer User Manual

Page 221

221

• If there are gaps or the pattern is faint, clean the print head.

• If almost the entire pattern is missing, click

Finish

and perform a Power Cleaning.

If you don’t see any improvement after cleaning the print head up to 3 times, turn the product off using
the

power button and wait at least 12 hours. Then run a nozzle check and try cleaning the print head

again, if necessary. If quality still does not improve, run a Power Cleaning.

Parent topic:

Print Head Nozzle Check

Related topics

Loading Paper

Print Head Cleaning

If print quality has declined and the nozzle check pattern indicates clogged nozzles, you can clean the
print head.

Note:

You cannot clean the print head if an ink cartridge is expended, and may not be able to clean it

when a cartridge is low. You must replace the cartridge first.

Parent topic:

Print Head Maintenance

Related concepts

Related tasks

Removing and Installing Ink Cartridges

Cleaning the Print Head Using the Product Control Panel

You can clean the print head using the control panel on your product. Cleaning uses ink, so clean the
print head only if print quality declines.

Load a few sheets of plain paper in the product.