Epson WorkForce WF-2960 Wireless All-in-One Color Inkjet Printer - Manual (Page 249)

249
LCD screen message Condition/solution
The printer's borderless
printing ink pad has
reached the end of its
service life. It is not a
user-replaceable part.
Please contact Epson
support. The ink pad is at the end of its service life. Turn off the product and contact
Epson for support.
Paper Setup Auto
Display is set to Off.
Some features may not
be available. For details,
see your documentation. The Paper Setup Auto Display setting must be enabled to use AirPrint.
System Error
An error occurred. Turn
the device off and back
on again. If this occurs
again, contact Epson
support.
Turn the printer off and on again.
If you are using a Wi-Fi connection, turn the wireless router off and on again.
If you still see the error message, make a note of the error code and contact
Epson support.
No dial tone is detected. Make sure the phone cable is connected correctly and the phone line works.
If you connected the product to a PBX (Private Branch Exchange) phone line
or Terminal Adapter, change the
Line Type setting to PBX . If you still cannot
send a fax, turn off the Dial Tone Detection setting. (Turning off the Dial
Tone Detection setting may cause the product to drop the first digit of a fax
number.)
The combination of the
IP address and subnet
mask is invalid. See
your documentation for
more details. There is a problem with the network connection to your product. Check the
solutions in this guide.
To use cloud services,
update the root
certificate from the
Epson Web Config
utility. Access your product's built-in Web Config utility and update the root
certificate for your product.