Epson WorkForce WF-2960 Wireless All-in-One Color Inkjet Printer - Manual (Page 317)

317
Securities WEP (64/128 bit)
WPA2-PSK (AES); complies with WPA2 with support for
WPA/WPA2 Personal
WPA3-SAE (AES)
Note: Wi-Fi Direct supports WPA2-PSK (AES) only.
Frequency range 2.4 GHz
Communication mode Infrastructure mode
Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b
Note: Simple AP mode is compatible with a Wi-Fi connection
(infrastructure) or an Ethernet connection.
Ethernet
Standards IEEE802.3i (10BASE-T); use a category 5e or higher STP (Shielded
Twisted Pair) cable to prevent risk of radio interference
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet); connected device should
be IEEE802.3az compliant
Communication mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
Connector RJ-45
Network Protocols (IPv4/IPv6)
Network Printing IPv4: EpsonNet Print (Windows), Epson Email Print, Epson Remote
Print
IPv4/IPv6: Standard TCP/IP (Windows), WSD Printing (Windows),
Bonjour Printing (Mac OS), IPP Printing (Windows/Mac OS), AirPrint
(iOS/Mac OS)
Network Scanning IPv4: Epson ScanSmart, Event Manager, Epson Scan to Cloud
IPv4/IPv6: Epson Scan 2, AirPrint (Scan)