Epson WorkForce WF-2960 Wireless All-in-One Color Inkjet Printer User Manual
Page 182
182
4.
Do one of the following to select fax recipients:
•
Manually enter a fax number
: Select
Keypad
and enter a fax number. Select
OK
when done. To
add another fax number, repeat the same steps.
Note:
If direct dialing has been restricted, you can only select the number from the contact list or
fax history. If necessary, enter an outside line access code (such as 9) at the beginning of the fax
number. If the access code has been set up in the
Line Type
setting, enter the
#
pound sign
instead of the code. If your fax number requires a brief pause, select
-
to insert a pause symbol
(–).
•
Select from the contact list
: Select
Contacts
to display the contact list. Select one or more
contacts (select the contact again to deselect it). You can also select the
Search for Contacts
field to search for recipients by name, index name, or entry number. Select
Close
when you are
finished.
•
Select from the sent fax history
: Select
Recent
to display the sent fax history. Select a recipient
from the list.
Note:
To delete entered recipients, select the recipient field, select the recipient you want to delete,
and select
Remove
.
5.
If you need to change any fax settings, select
Fax Settings
and select your settings.
6.
Select the
icon on the Recipient tab to send the fax.
Note:
To cancel faxing, select
.
After scanning your originals, your product dials the number and sends the fax.
Parent topic:
Sending Faxes from the Product Control Panel
Related references
Related tasks
Related topics
Setting Up Contacts Using the Product Control Panel
Placing Originals on the Product