Epson WorkForce Pro WF-7820 All-in-One Inkjet Printer - Manual (Page 76)

76
Setting name Available options Description
Secure
Connection None
STARTTLS
SSL/TLS
Selects the encryption protocol used by the email server.
Used with the
SMTP AUTH or Off authentication methods.
Certificate
Validation Enable
Disable
Determines whether the CA Certificate is validated. You
must import a CA certificate to use this setting.
POP3 Server
Address — Lets you enter the address of the POP3 server using IPv4
or FQDN format.
POP3 Server Port
Number — Lets you enter the port number of the POP3 server. The
default port is 25.
Parent topic: Configuring Email Server Settings
Changing or Updating Network Connections
See these sections to change or update how your product connects to a network.
Accessing the Web Config Utility
Changing a USB Connection to a Wi-Fi Connection
Changing a Wi-Fi Connection to a Wired Network Connection
Connecting to a New Wi-Fi Router
Disabling Wi-Fi Features
Parent topic: Wi-Fi or Wired Networking
Accessing the Web Config Utility
You can select your product's network settings and confirm its operating status using a web browser.
You do this by accessing your product's built-in Web Config utility from a computer or other device that is
connected to the same network as your product.
Note: You can also access the Web Config utility from the product information area in the Epson Smart
Panel app.
1. Print a network status sheet.
2. Locate the IP address for your product that is listed on the network status sheet.