Epson WorkForce Pro WF-7820 All-in-One Inkjet Printer - Manual (Page 169)

169
3. Click or Start and select Computer .
4. On the left side of the window, select Network .
5. Locate your product on the Network screen, right-click it, and select Install .
6. When you see the User Account Control screen, click Continue .
Note: If you see an Uninstall screen, click Uninstall and repeat these steps as necessary.
7. When you see the message Your device is ready to use in the Windows taskbar, click the
message.
8. On the Driver Software Installation screen, make sure your product is listed as Ready to use . Then
click Close .
9. Do one of the following:
• Windows 7 : Click and select Devices and Printers .
• Windows Vista : Click Start and select Control Panel > Hardware and Sound > Printers .
10. Make sure that an icon appears for your product's name on the network.
When you use WSD, select your product name to scan over the network.
Parent topic: Starting a Scan Using the Product Control Panel
Scanning to the Cloud
You can use the control panel to send your scanned files to a destination that you have registered with
Epson Connect.
Note: Make sure to set up your product using Epson Connect before using this feature.
1. Place your original on the product for scanning.
2. Press the home icon, if necessary.
3. Select Scan .