Epson WorkForce Pro WF-7820 All-in-One Inkjet Printer - Manual (Page 314)

314
Code Condition/solution
313
323
413
A communication error has occurred. Print a status sheet to check the network status.
Check the location or server settings in the Network Settings menu.
314 The data size exceeds the maximum size for attached files. Check the scan settings and
lower the resolution or increase the compression ratio as necessary to reduce the size.
324 A file with the same name already exists in the specified folder.
325
326
There is not enough space available for saving the scanned files in the specified folder.
328
428
The destination is incorrect or does not exist. Check the setting entered as the
Save/Forward Destination folder.
331 A communication error occurred while acquiring the destination list. Make sure the
product is connected to the network correctly. Reduce the number of documents.
332 There is not enough storage space available to save the scanned image in the destination
storage.
333 The destination could not be found because the destination information has been
uploaded to the server before sending the scanned data. Select the destination again.
334 An error occurred while sending the scanned data.
341 A communication error has occurred. Make sure the product is connected to the computer
or network correctly, and that you have installed Epson Event Manager.
422 An authentication error has occurred. Check the setting entered as the Save/Forward
Destination folder.
423 A communication error has occurred. Print a status sheet to check the network status and
check the setting entered as the
Save/Forward Destination folder.
425 There is not enough storage space in the forwarding destination folder.
Parent topic: Solving Problems
Running a Product Check
Running a product check helps you determine if your product is operating properly.
1. Disconnect any interface cables connected to your product.