Epson WorkForce Pro WF-7820 All-in-One Inkjet Printer - Manual (Page 179)

179
Registering Contacts for Network Folder or FTP Scanning - Web Config
You can register a list of contacts for scanning to a network folder or FTP server using Web Config and
your computer's internet browser.
Before you begin, print a network status sheet and locate the IP address for your product on the sheet.
Note: These instructions use Internet Explorer as an example browser.
1. Start Internet Explorer on a computer that is using the same network as your product.
2. Type your product's IP address into the address bar and press Enter .
3. Click Continue to this website (not recommended) .
4. Click Contacts .
5. Select the number you want to use for the contact you are adding and click Edit .
6. Select Network Folder (SMB) or FTP as the Type setting.
7. Enter the following information for the contact:
• Name : The name to display in your product's contact list.
• Index Word : Enter a word to identify this entry when searching for it (up to 30 characters). This
field is optional.
• Assign to Frequent Use : If you want to identify the contact as a frequently used address, select
On . This makes it quicker to select the contact when you scan.
• Save to : The network path to the shared folder.
Enter the folder path name in one of the following formats depending on the Type setting you
selected:
• SMB : host_name\folder
• FTP : host_name/folder_name
• User Name and Password : Enter only if you have set up a password on your computer.
• Connection Mode : For FTP locations, select Passive Mode if there is a firewall between the
product and FTP server.
• Port Number : For FTP locations, enter the port number.
8. Click Apply .
After a moment, you see a message telling you that contact registration is complete.
9. Close your web browser.